Quick Dive Information on the Latest Product Additions and New Components.
ADI's LTC6560/LTC6561 are low-noise, transimpedance amplifiers with 220 MHz bandwidth well suited for LIDAR receivers with multiple APDs.
Linear Technology's LTC4376 is a 7 A ideal diode with reverse input protection, which reduces power consumption, heat dissipation, and PC board area.
Linear Technology's LTC6810 is a multicell battery stack monitor that measures up to six series-connected battery cells.
Power by Linear™/Analog Devices LTC3880/LTC3887 are dual, PolyPhase® DC/DC synchronous step-down switching regulator controllers.
Power by Linear™/ADI's LT3094 negative regulators feature ADI's ultra-low noise and ultra-high PSRR architecture for powering noise-sensitive applications.
Analog Devices’ LTC4126 7.5 mA Li-Ion battery charger for Li-Ion battery powered hearing aid, IoT wearables, and wireless headset applications.
ADI's LTC2972/74/75/77/79 are power system managers used to sequence, trim, margin, supervise, manage faults, provide telemetry, and create fault logs.
Analog Devices' 90 MHz, 2200 V/µs, 30 V amplifiers for data acquisition systems, wideband single amplifications, and high-fidelity video/audio applications.
Power by Linear™/Analog Devices’ LT3033 regulator supplies 3 A output current with 95 mV typical dropout voltage.
Analog Devices’ LTC3372 buck DC/DC regulators are ideal for multichannel power supplies found in automotive, industrial, and always on applications.
Linear Technology/Analog Devices' LTC2063 and LTC2064 are 20 kHz operational amplifiers enabling high resolution measurement at extremely low power levels.
Linear Technology's LT7808 is a buck-boost switching regulator controller and is compatible with most solar, automotive, telecom, and battery-powered systems.
Analog Devices’ LTC7000 / LTC70001 are fast, high-side, N-channel MOSFET gate drivers that operate from input voltages up to 135 V (150 V abs max).
Linear Technology's operational amplifiers can serve as a signal chain building block in portable, energy harvesting, and wireless sensor applications.
Linear Technology’s LTC2353 SAR ADCs offer input signal flexibility making them ideal for high voltage applications requiring wide dynamic range.
The LTC6363 from Linear Technology is a low power, low noise, fully differential op amp with rail-to-rail outputs optimized to drive low power SAR ADCs.
Analog Devices’ LTM4686 dual 10 A or single 20 A μModule® regulator with digital power system management supports telemetry polling rates up to 125 Hz.
Power by Linear™/ Analog Devices’ LTC4264 and LTC4265 are powered device (PD) interface controllers intended for IEEE 802.3at high-power PoE applications.
Power by Linear™/Analog Devices’ LTC4278 is an integrated PD controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications.
Power by Linear™/Analog Devices LTC4269 is an integrated PD controller and switching regulator intended for high power IEEE 802.3at and 802.3af applications.
Keep an eye on your inbox for news and updates from Digi-Key!
Please enter an email address