Eaton's CHSA Series Features: 

• Compact and low-profile resistive-based solutions 
• Power ratings up to 15 W and resistances down to 0.1 mΩ and up to 5 mΩ 
• Three footprints from 2512 to 5931 EIA 
• The construction allows for low inductance (<0.1 µH) 

Texas Instruments' OPA328 CMOS OP amp is optimized for low noise and wide bandwidth. Linear input stage with zero crossover distortion. Input common-mode voltage range extends 100 mV beyond the negative and positive supply rails. Output voltage typically swings within 10 mV of the rails.

Take accurate, conditioned measurements with NI’s CompactDAQ. The chassis features USB or Ethernet connectivity and comes with different slot counts for I/O modules. Pair the chassis with C-Series modules to create the right mix of analog I/O, digital I/O,  counter/timer, and sensor measurements.

The WR-CIRC series consists of M12, A-coded circular connectors. Despite severe working conditions, these robust circular connectors can be mated and locked to provide a waterproof and dustproof connection without loss of connection or signal. -Current rating: up to 5 A -Voltage rating: up to 250 V

Phoenix Contact's CAPAROC system of electronic circuit breakers offers modules that are either Class I, Division 2 rated, or triple rated with CID2, ATEX, and IECEx for use in hazardous locations around the world.

• Compact, High Durability Switch Designed for Reliability 
• Minimize Performance Deterioration 
• Clear Click Feeling and Quick Response Time 
• Ideal for Gaming Controllers, Mice, Wall Controls & Small Devices

Microchip's embedded security solutions combine dsPIC33 DSCs and PIC24 MCUs with CryptoAuthentication™ and CryptoAutomotive™ ICs to provide robust security.

Solve your toughest thermal challenges. Softening between 50C to 70C, Tpcm 7000's initial pad thickness can decrease to a bondline as thin as 35µm. The specialty polymeric matrix offers superior pump out resistance when compared to other thermally conductive greases or phase change materials.

• PCIe Gen 4 x4 with Seq. Read/Write: 6GB/s; 4GB/s 
• 3D TLC/SLC mode; 64GB to 960GB
• Digital Signed FW for Added Boot Security 
• Full E2E Data Path Protection for Robust Data Integrity 
• 100% Full Range Screening to Achieve 0 DPPM Target
• NVME 2.0 with MI Appendix C 

New features in this 4th gen XPG LED include a higher 3A max. drive current, optimized on-axis light output, lower thermal resistance and long-term reliability for a wide range of indoor and outdoor directional lighting.

The FN2600 low-profile EMC filters with IEC inlet inputs can be integrated into standard 1U rack cabinets for applications such as robotics and datacenters. FN2640 & FN2660 (2-stage) series offer high and very high attenuations respectively. Rated 250V, up to 20A with worldwide safety approvals.

Resettable SMD and radial PTC fuses, Slow Blow and Fast Acting surface mount fuses that comply with AEC-Q200 qualifications that protect automotive applications from overcurrent and overtemperature. EV fuses protect high-power battery charging and management systems up to 1000 VDC.

SITOP selectivity modules distribute the load current across several 24 VDC load circuits and monitor them reliably for overload and short-circuit conditions. The electronics permit brief current peaks caused by high inrush currents but isolate load circuits in the event of an extended overload

Ruggedly designed, engineered, and constructed infrastructure solutions for harsh-duty manufacturing environments. Molex offers a broad selection of M8 and M12 connectors and cordsets, heavy duty connectors, HarshIO modules, and DIN valve solutions for all industrial applications.

Belden's REVConnect has been changing the communication industry as a single reliable, easy termination that offers unparalleled versatility. The system covers both plugs and jacks, has field-attachable options, and is the perfect termination for Bonded Pair and DataTuff cables from Belden.

Plastic fasteners, offered in both metric and imperial, have many applications. They come in many variations to fit the needs of your applications. They are excellent for insulating against moisture and electricity.